Panatron Sponsoring Soldering Tutorial for Cal State Polytechnic Pomona Engineering Students

We at Panatron for every quarter we sponsor a soldering tutorial for a school that needs it. Because of the cutbacks in our California university's, our engineering students are graduating without any soldering experience and employers are the ones that are having the problems because of this reason. We found out the hard way ourselves. That is why we are trying to help. So on October 19th 2013 between the hours 12 PM to 5 PM we had a soldering tutorial where we had 13 students. We had little soldering kits for students to solder on a PC board, some of them were surface mount and some were the conventional PCB with through holes. After they were done soldering there was a First and second prize, the first prize went to Thomas Luong and the second prize went to Michael Borado. Also we have photos.

Hardinge CHNC Automatic Chucker-Super Precision - $6500

This is a Hardinge CHNC-16 and an HF-6R Bar Feed. Serial # CHNC-1235-A2-16. This machine comes with a 6 foot bar feed. Was manufactured in 1980 and has a problem with threading, otherwise the machine is in working condition. The CNC Control is GN-6 Series, 6T-Control. 40-4000 RPM Spindle Drive Unit 7 H.P. Maximum Continous Duty. Comes with Maintenance Manuals shown on picture. Located in factory. Buyer is responsible for loading and transportation. Available for inspection weekdays noon to 4:30. Sold as is, where is. Advance appointment required for inspection. If you buy 1 you get the second one free for parts only. The second unit is not complete.

CNC Citizen Swiss Lathe F-12 - $7500

This is a Citizen F12 CNC Lathe. It is a very good machine, no known problems. Taken out of service because of upgrades for newer machines. Includes bar feed stands and some tooling. Manuals are included. Was manufactured in 1984, we purchased it in 1987. Has a CNC lathe controller Fanuc 3TC. Located in factory. Buyer is responsible for loading and transportation. Specifications: Maximum Working Dia.: 0.50" Minimum Working Dia.: 0.0.2" Maximum Length Per Chucking: 4.92" Numeer Of Tool Stations: 10, (2) 5-Pos Turretb) Main Spindle Speeds (RPM): 220/1000 Spindle Speeds Rotary Tools: Low Speed Turret: 200 - 1000 RPM High Speed Turret: 300 - 6400 RPM Maximum Drilling Diameter: 0.315" Maxmum Feed Rate: 200" Per Minuts Rapid Traverse X & A Axes (IPM): 390" Per Minute Minimum Indexing Increment Of Main Spindle: 1 DEG. Pulse Minimum Input Increnent: 0.00004" Main Spindle Motor (30 Min. Rating/Cont.): 7.3HP/5HP Guide Bushing Holder: Synchronous Rotary Approx Maching Dia.: 6ft x 4-1/2ft x 6ft x 4" Approx Weight: 5100 LBS. Available for inspection weekdays noon to 4:30. Serious buyers only. Sold as is, where is. Advance appointment required for inspection. Also if you buy 2 at the same time we will lower the price.

CNC Citizen Swiss Lathe F12 Serial Number 1620 - $6,500.00

This is a Citizen CNC Swiss Lathe that has a live tooling problem/index servo motor. This unit comes with bar feed and there is some tooling in the machine. With a CNC Controller Fanuc T3. Also comes with manuals. Located in factory. Buyer is responsible for loading and transportation. Available for inspection weekdays noon to 4:30 pm. Serious buyers only. Sold as is, where is. Appointment required for inspection.

FXR-Microlab L600B & L537 WR650 Adapter / Slotted Line

Adapter Waveguide To Coax UG-418A to Type"N" Female WR650 and Slotted Line

Call or email for repair or calibration

Cell: (909) 263-7364 Email: max@panatron.com